Thursday, April 21, 2016

Muhammad Rafique

How To Use SN Write Tool To Repair Imei Of Mediatek Device,s



Download and extract SN Write Tool On Your PC.After U Will See Following Files (Look Image Below) Now Run SN Writer.exe As Administrator.


After open SN Writer.exe U Will See The Following Screen (See Image Below)



Now Select On ComPort: and Select USB VCOM and Also Click On Target Type: and Select Smart Phone (only for android phones, if u want to write IMEI on feature phones then select feature phone option as target type )


Now Click On "System Config" Button


Once System Config Is Launched Then Choose IMEI in Write Option (U Can Also Select BT & WiFi Option )



If U Have Dual SIM Phone Then Select Dual IMEI (if u have single sim phone then skip this step)


Now Add MD1_DB and AP_DB Under DataBase File Option (Both Files Come With Your Phone Firmware) and After Click On Save Button.


Now Click On Start Button


Now Write IMEI Here and Press Ok


After Connect Your Switched OFF Phone Through USB Cable and Wait For Complete.

After Complete U Will See Green Pass :)

Enjoy

Warning: IMEI Changing Is Illegal. This Tool Is Only For Repairing Orignal IMEI ( Orignal IMEI Can Be Found In Back Sticker Of Phone ).


Credits: This Tool Is Created By Mediatek Inc, Full Credits Goes To Them For This Wonderful Tool
Read More
Muhammad Rafique

Qmobile Noir W80 v5.1 MT6580 Factory Firmware - Free Download - Bypass Google Account - Flashing Instructions




File Version : MT6580__QMobile__W80__WBW5615QM__5.1__WBW5615QM_0201_T5627

  • Qmobile Noir W80 Stock Firmware  - Download
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and Qmobile.
    2. Download Drivers (both 1 and 2) , Flashtool and Qmobile stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar/zip file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6580_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your Qmobile Noir W80 and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.

    How To Bypass Google Account On Qmobile Noir W80 Which Come After Reset ?

    First Try This ADB Method ( Follow Link For More Info )
    Second Method Is Write Firmware From Above Give Link ( Format ALL + Download )

    Note :- Comment Below To Get Instant Help :)) 
    Read More

    Wednesday, April 20, 2016

    Muhammad Rafique

    How To Do Hard Reset / Factory Reset Samsung Galaxy S7




    • Before Starting Make Sure Battery Is Charged Enough ( Atleast 50% )
    • Power Off Your Phone Completely.
    • Press Volume Up + Home + Power Buttons simultaneously to get into Recovery mode.
    • Now Select " wipe data/factory reset " from recovery options by using volume down key.
    • and press power button once to confirm and u will see next screen with options.
    • Now Select "Yes -- Delete All User Data.." from next screen by using volume down key.
    • and press power button once to confirm.
    • Now Phone Will Start Deleting All Your User Data and Restore Defaults Your Phone To Factory Condition.
    • After Complete Reset , Your Phone Will Come Back To Home.
    • Now Press Power Button Once To Reboot Your Phone Into Normal.
    • Done.


    Backup Your All Your Important Data First.

    Method Is Tested but still Do At Your Own Risk


    Like Comment Share 
    Read More
    Muhammad Rafique

    AUX V970 ( Samsung China Copy ) v4.0.4 MT6577 Factory Firmware - Step By Step Flashing Instructions



    Phone found! [ 5 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6575
    BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
    BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
    Processing BROM stage
    i2c Init : 0300771F
    SpeedSet : 0000
    VChrgSet : 0x28 , BatStat : 0x02
    WD Disable stat : 0x0000
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
    Sending and initialize DA ...
    Running DA ver.3.2 on BBID : 0x84
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , HYNIX
    [eMMC] : FLASH_CID : 90014A2058494E594816A14AFC03107D
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000E7000000
    [eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
    DEV RID    : 34DF689D868F5245891315DC4B53464E
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    Reading Flash Content now ... 

    Brand     : alps
    ProdName  : eastaeon17_td_ics2
    ProdModel : Athens15_TD/V2
    Device    : eastaeon17_td_ics2
    AndroidVer: 4.0.4
    MTKxCPU   : MT6577
    MTKxPRJ   : ALPS.ICS2.TDD.MP.V1.23

    [Read Ok] : preloader_eastaeon17_td_ics2.bin
    [Read Ok] : DSP_BL
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6577 / V1.0.0 / eastaeon17_td_ics2 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 417 MiB
    Scatter saved to : C:\Users\hp\Desktop\MT6577__alps__Athens15_TDV2__eastaeon17_td_ics2__4.0.4__ALPS.ICS2.TDD.MP.V1.23\

  • AUX V970 ( Samsung China Copy )  Firmware - Download ( Link Is Disabled )
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and AUX V970.
    2. Download Drivers (both 1 and 2) , Flashtool and AUX V970 stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar/zip file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6577_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your AUX V970 ( Samsung China Copy ) and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.


    Firmware Download Link Will Be Availabel Only When We Get 10 Comments or U Can Buy It From US by Contacting US ( Only 5$ )

    After Write This Firmware,May Be U Need To Reset Your Phone 
    Read More

    Tuesday, April 19, 2016

    Muhammad Rafique

    Qmobile Noir M99 v5.1 MT6580 Factory Firmware - Nvram - Free Download - Step By Step Instructions To Unbrick Your Phone - Bypass Google Account ( FRP )



    Brand     : QMobile
    ProdName  : d5780_qmobile
    ProdModel : M99
    Device    : d5780_qmobile
    AndroidVer: 5.1
    MTKxCPU   : MT6580
    MTKxPRJ   : ALPS.L1.MP6.V2_RGK6580.WEG.L_P2

    [Read Ok] : preloader_d5780_qmobile.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img
    [ScatCFG] : MT6580 / V1.1.2 / d5780_qmobile / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1660 MiB
    Scatter saved to : C:\Users\hp\Desktop\MT6580__QMobile__M99__d5780_qmobile__5.1__ALPS.L1.MP6.V2_RGK6580.WEG.L_P2\

  • Qmobile Noir M99 Stock Firmware ( NvRam Included ) - Download ( Link Is Disabled )
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and Qmobile.
    2. Download Drivers (both 1 and 2) , Flashtool and Qmobile stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar/zip file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6580_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your Qmobile Noir M99 and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.

    How To Bypass Google Account On Qmobile Noir M99 Which Come After Reset ?

    First Try This ADB Method ( Follow Link For More Info )
    Second Method Is Write Firmware From Above Give Link ( Format ALL + Download )

    Important Note : Download Link Will Be Availabel Only When We ll Get Atleast 10 Valid Comments,If U Don,t Want To Wait Then U Can Buy It From Us By Contacting Us ( Only 8$ ) 
    Read More
    Muhammad Rafique

    Gfive Smart President 2_s 4.4.2 MT6572 Factory Firmware - Free Download - Instructions To Flash Firmware - Unbrick

    Gfive_Smart_President_Smart_2_s_Firmware_Flash_File


    Gfive Smart President 2_s Flashing and Firmware


    Device Brand   : GFIVE
    Device Model   : Smart_2s
    Device CPU     : MT6572
    Device IntName : Smart_2s
    Device Version : 4.4.2
    Device Compile : 11/26/2014 3:04:33 AM
    Device Project : ALPS.KK1.MP7.V1
    Device ExtInfo : GFIVE President Smart 2_s




  • Gfive Smart President 2_s Firmware - Download ( Link Is Not Enabled Yet )
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and Gfive Phone.
    2. Download Drivers (both 1 and 2) , Flashtool and Gfive stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6572_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your Gfive Smart President 2_s and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.


    Important note: Download Link Will Be Enabled Only After When We ll Get 10 Comments.and If U Can,t Wait or U Need Urgently Then U Can Buy It From Us By Contacting Us ( Only 5$ )
    Read More
    Muhammad Rafique

    How To Enter Download Mode On Samsung Galaxy Note 4

    how to enter download mode on samsung galaxy note 4



    Here Is the method to Enter Your Phone ( Galaxy Note 4 ) In Download Mode and After Getting Your Phone In Download Mode U Can Easily Install Stock Firmware According To Your Need.


    Lets Start,
    • Make Sure Your Phone Battery Is Charged Enough ( Atleast 50% )
    • Now Power Off Your Phone Completely ( Skip This Step If Your Phone Is Already Switched Off )
    • Press and Hold Volume Down + Home + Power Buttons Together , When U See Warning Screen On Your Phone Now Release All Buttons.
    • Now Press Volume Up Button Once To Enter Download Mode.
    • Now Your Device Should be In Download Mode.
    • Done.

    More Interesting Stuff :

    All Version Of Odin Tool - Samsung USB Drivers - Step By Step Guide To Install Firmware On Any Samsung Android Phones
    Read More

    Thursday, April 14, 2016

    Muhammad Rafique

    Samsung Galaxy E7 Clone ( SM-E7000) 4.4.2 MT6572 Factory Firmware - Free Download








    Complete Guide To Install This Firmware With SP Flash Tool ( USB Drivers Included )

    http://www.all-gsm-solutions.xyz/2015/12/guide-to-flash-install-stock-firmwares.html
    _________________________________________________________________________________
    Phone found! [ 5 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 1101003030344745300112558A1562B9
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
    [eMMC] : FLASH_CID : 1101003030344745300112558A1562B9
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
    DEV RID    : D387597F43A9754E23F2FDC4A9621EA9
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now ...

    Brand     : alps
    ProdName  : rtech72_we_72_kk
    ProdModel : rtech72_we_72_kk
    Device    : rtech72_we_72_kk
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP6.V1

    [Read Ok] : preloader_rtech72_we_72_kk.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6572 / V1.1.1 / rtech72_we_72_kk / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1064 MiB
    Scatter saved to : C:\Users\hp\Desktop\MT6572__alps__rtech72_we_72_kk__rtech72_we_72_kk__4.4.2__ALPS.KK1.MP6.V1\

    ________________________________________________________________________________



    Note : This File Is Password Protected But Don,t Worry File Is Absolutly Free.

    Password : all-gsm-solutions-e7-clone-free


    Read More

    Wednesday, April 13, 2016

    Muhammad Rafique

    Samsung Galaxy Note 3 SM-N9005 Lollipop and KitKat Stock Repair Firmwares - QCN & EFS & Cert & Pit

    Read More
    Muhammad Rafique

    Qmobile Noir Z7 4.4.2 MT6592 Factory Firmware - Free Download - Instructions - Unbrick



    Brand: Qmobile
    Model: Noir Z7
    Android ver: Kitkat v4.4.2
    File Ver : Z7 QMobile__4.4.2__ALPS.KK1.MP1.V2.10
    Instructions To Flash Qmobile Noir Z7 - Unbrick - Fix Hang On Logo - Slow Running etc




  • Qmobile Noir Z7 Firmware - Download
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and Qmobile.
    2. Download Drivers (both 1 and 2) , Flashtool and Qmobile stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6592_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your Qmobile Noir Z7 and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.

    firmware credits: jamil mobile
    Read More
    Muhammad Rafique

    Prestigio Hike 828 / 828A MT6589 4.2.2 Stock Firmware ROM ( Flash File )

    hike_828a_x1_4.2.2_mtk_6589_firmware_flash_file


    Brand     : HIKe
    ProdName  : HIKe 828A
    ProdModel : HIKe 828A
    Device    : HIKe 828A
    AndroidVer: 4.2.2
    MTKxCPU   : MT6589
    MTKxPRJ   : X-S15A_HIKe_L3SM_200_140401

    [Read Ok] : preloader_ckt89_we_jb2.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6589 / V1.0.0 / ckt89_we_jb2 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1200 MiB
    Scatter saved to : C:\MT6589__HIKe__HIKe_828A__HIKe_828A__4.2.2__X-S15A_HIKe_L3SM_200_140401\

    All done!

    Download Here
    Read More
    Muhammad Rafique

    Root Qmobile Noir I6I - Lollipop 5.1 - Boost Your Battery 100% - Instruction Step By Step





    • Download KingRoot APK From Here Using Your Phone.
    • Now Open File Manager App From Your Phone Menu.
    • and Find KingRoot APK In Download Folder ( Phone Storge > Download or SDcard > Download )
    • Now Open KingRoot APK To Install ( Make Sure UnKnown Sources Is Checked In Settings )
    • After Install Successfull,Open KingRoot App From Your Phone Menu.
    • Now Follow Screen Instructions.KingRoot Will Check If Your Phone Have Root Permissions Or Not.
    • If Your Phone Does Not Have Root Permissions Then U Will See Try Root Button.
    • Click On Root Button,Now KingRoot Will Start Rooting ( Need Active Internet Connection )
    • Afte Root Success 100%,U Can Install and Use Any Android App Which Need Root Permissions. ( ex. xmode app etc ) and u can also do many things like installing CWM Recovery , Backup Your Firmware etc






    How To Boost Your Battery Timing On Qmobile Noir I6I ?

    Acctually Qmobile Noir I6i Already Have Good Battery But Some Users Play  Games etc They Need More Battery Timing. So With The Help Of Below Guide Ur Phone Battery Will Get More Power And U Will Feel Low Battery Consuming. ( This Guide Will Work On Any Android Pone Which Is Rooted and KingRoot App Installed )

    First Of All Root Your With KingRoot or If U Already Root then just install kingroot App.

    Open KingRoot App And U will Find A Tool Call Purify Open It and It Will Start Downloading Purify For Your Phone.After Install  Purify Run It and U Will Start Seeing Your Battery Growth Without Lowing Your Screen Briteness or Without Turing Off Any Feature Like Wifi,Bluetooth etc

    Just Try It.

    Qmobile Noir I6i Bypass Google Account Which Come After Reset.

    Read More
    Muhammad Rafique

    Bypass Samsung Google Account - FRP - Samsung Galaxy S7 & S7 Edge - Marshmallow 6.0.1 - New Security 2016





    • Connect Wifi On Phone After Factory Reset ( Startup Menu )
    • Download SideSync From Here and Install On Your PC First.
    • After Install Open SideSync and Connect USB To Phone ( Phone In Normal Mode )
    • After Connect USB A PopUp Menu Will Appear Now Select Browser or Chrome.
    • Now GoTo Galaxy Apps From Your Browser Or Chrome.
    • Press Agree In Galaxy Apps.
    • Select Search In Galaxy Apps and Type/Find Any Launcher and Download It.
    • Phone Will After Ask For Signup or Signin.
    • Now Make New Samsung Account Or Use Your Existing Samsung Account to Signin.
    • After Download Launcher Open Launcher.
    • Now From Launcher GoTo Settings > Security and Set Pin Code and Set : Do Not Show Notifications
    • Now GoTo "Other Security Settings" ( Settings > Security > Other Security Settings )
    • Now Click On Trust Agents and Turn Smart Lock Off.
    • Press Back and Click On Device Administrators and Deactivate android device manager.
    • Now Go Back To Settings and Click On Easy Mode  and Select Easy Mode.
    • Now Again GoTo Settings > Easy Mode and Off Easy Mode.
    • Now GoTo Settings > About Phone > Press 7 Times On Build No To Enable Devolper Mode or Settings > About Phone > Software Info > Press 7 Times On Built No To Enable Devolper Mode.
    • Press Back And GoTo Devolper Settings ( Settings > Devolper Settings ) and Enable Debugging Mode and  Enable OEM  Unlock.
    • Now Press Back and GoTo Backup and Reset and Reset Your Phone.
    • After Complete Reset Your Phone Will Turn On Normal
    • Enjoy.


    More Info I Will Update Soon If U Have Any Question or U Getting Any Problem,u cAn Comment Below To Get Help ASAP.

    http://www.all-gsm-solutions.xyz


    Read More

    Friday, April 01, 2016

    Muhammad Rafique

    Qmobile Noir Z8 Lollipop 5.0 Official Stock Firmware - Unbrick - Fast Download Link - By masterRt1994



    QMobile Noir Z8 - Official Stock Lollipop 5.0 Firmware - Direct Fast Download Link


    Brand : Qmobile
    Model : Noir Z8
    Android ver : 5.0.1 ( Stable )
    CPU : Qualcomm
    Type : Official Stock Firmware ( Qualcomm Images )
    OTA : Availabel For Some Builds Only
    Build No : QmobileZ8_MP_5.0_QMB_PK_06


    Download Link ( Fast , Resumable , Direct , Premium ):

    QmobileZ8_MP_5.0_QMB_PK_06.zip

    Flasher,Drivers ?

    Use QFIL Flasher ( Use Latest Version ),Install Qualcomm Drivers ( search google for drivers ).

    Want To Thanks Me ?

    U Can Thank Me By Sending 200Rs Balance On My Phone NO 0300-9428023 (JAZZ/Moblink).

    Need Kitkat Version ?

    Download Qmobile Noir Z8 Kitkat Stock Firmware Here

    Any Problem ?

    comment below to get solution.
    Read More